76 Agilent FrameScope Pro User’s Manual
2 Network Testing with the FrameScope Pro
WireMap Adapter Testing
WireMap Adapter Testing
WireMap testing checks for proper continuity and termination
of cables. It is used together with the WireMap Adapter .
The wiremap adapter is connected at the far end of a link or
channel to display and identify point-to-point four twisted pairs
connection.
The test identifies the following faults:
• Short circuit
• Open circuit
• Reversed pairs
• Crossed pairs
• Shield continuity faults
WireMap Adapter
The four indicator LEDs flash while the test is
being perform and go off after the test is
completed.
Channel or LinkChannel or Link