Filter
Top Products
System Operations 4
Remote Control
Agilent FrameScope Pro User’s Manual 115
Enabling and setting the remote control web server
If you have an auxiliary port, you can
choose whether to use this or the test port
for remote control.
If you change the port used for remote
control, you will have to restart the
FrameScope Pro for the change to take
effect.
You can also choose to increase the web
access security by adding a User Name and
Password.
You can also change the default port (80). If
you change the Port Number, then you must
specify the port number to access the
FrameScope.
For example, if the FrameScope’s address is
209.6.108.253, the URL would be
http://209.6.108.253.
If Port 8080 is used, the URL would become
http://209.6.108.253:8080
Whenever the Remote Control settings are changed, the
FrameScope must reboot to use the new settings.
Starting remote control
The FrameScope Pro Remote Control can be evoked by either
using the FrameScope Pro Remote Host or from the
FrameScope Pro Web Page hosted by the FrameScope Pro.
The FrameScope Pro Remote Host can be launched from the
Windows Start menu,