Filter
Top Products
110 Agilent FrameScope Pro User’s Manual
4 System Operations
Network Settings
• Default Gateway – This is the default gateway (router) the
FrameScope will use to communicate with devices on
other subnets.
Press Next when satisfied with your choices.
The second Network Settings Setup screen
allows you to change the Host Name from
the default, enter a DNS Domain, and to
provide DNS and WINS server addresses.
Host Name This name will be used to
identify the FrameScope in NetBIOS and
FrameScope protocols. The name defaults
to ‘FRSCOPE’ plus the last 3 hexadecimal
digits of the MAC Address. It may be
changed to any name desired.
DNS and NetBIOS Settings Devices on the
network may be referred to by name. In the
Domain Name System (DNS), the
FrameScope asks DNS servers to convert
the name to an IP address. When NetBIOS
names are used, the FrameScope asks WINS
servers to convert the name to an IP
address. The DNS Domain and the DNS and
WINS servers can be learned through DHCP and may be entered
manually by the user. If the user enters a DNS Domain, it will be
used in place of the DHCP supplied value. If the user enters
DNS or WINS servers, they will be used in preference to the
DHCP supplied values.
When satisfied with all the settings, press Next to get the third
Network Settings Setup screen.