Filter
Top Products
64 Agilent FrameScope Pro User’s Manual
2 Network Testing with the FrameScope Pro
Performance Tests
7 If a password is preset in the slave FrameScope, press the
Slave Password button on the master FrameScope to enter the
Select full range to measure
frame loss rate specified by step
size or specific rate
Select the frame direction to
measure.(for loopback only bi
direction is present)
Max Data Rate is used for initial
frame speed and performance
calculation. Enter the maximum
data rate of the network under
test. If not known, the link speed
will be used.
Duration is the time taken (in
seconds) to transmit frames
For better results, adjust the
duration to load the device
under test sufficiently.
Frame loss rate settings
screen
Specify the frame length or
select full range to collect all
frames.
Select the frame direction to
measure.(for loopback only
bidirectional is present)
Specify the frame length or
select full range to collect all
frames.
Back to Back
settings screen
Duration is the time taken (in
seconds) to transmit burst
frames
For better results, adjust the
duration to load the device
under test sufficiently.