Filter
Top Products
12 Agilent FrameScope Pro User’s Manual
1 Introducing the FrameScope Pro
Safety Considerations
AC Line Power Supply Requirements
The Agilent FrameScope Pro can operate through the supplied
AC adapter between 100V and 240V ± 10%, at a frequency in the
range from 50 to 60Hz ± 5%. The maximum power consumption
is 30VA.
Line power cable
The type of power cable shipped with each instrument depends
on the country of destination.
WARNING
Please pay attention to the following laser safety warnings:
1. Under no circumstances look into the end of an optical cable
attached to the optical output when the device is operating. The
laser radiation can seriously damage your eyesight
2. Do not enable laser when there is no fiber attached to the
optical output connector.
3. The use of optical instruments with this product will increase
eye hazard.
4. The laser module has a built-in safety circuitry which will
disable the optical output in the case of a fault condition
5. Refer servicing only to qualified and authorised personnel.