Filter
Top Products
26 Agilent FrameScope Pro User’s Manual
2 Network Testing with the FrameScope Pro
Network Testing Overview
Network Testing Overview
The following steps describe the general procedure for
performing network analysis testing using the FrameScope Pro.
1 Power the unit on. See “Switching the FrameScope On and
Off” on page 19.
2 Connect to the network under test. See “Connecting to the
Network and Using the FrameScope Pro” on page 22.
The FrameScope automatically begins to poll the network
and locate devices. See “Examining the Network” on page 27.
3 View details about the detected network resources. See
“Detailed List” on page 28.
4 Perform an Autotest on any or all desired resources. See
“Running an Autotest” on page 29.
5 Select any devices on the network and perform additional
testing, such as:
• Ping test; see page 38.
• Trace Route test; see page 41.
• SNMP Queries; see page 44.
6 Save results as desired, perform other tests or functions.