Filter
Top Products
90 Agilent FrameScope Pro User’s Manual
3 Voice Testing with the FrameScope Pro
Running a Voice Test
When the Start button is
pressed in the SIP Setting
Window, The FrameScope Pro
registers with the registrar/ SIP
Server as per the options
selected by the user in the SIP
setting Window asks to do so,
before placing a call or sending
an Invite message.
Else, it calls directly to the IP
address specified in the SIP
Server window.
The SIP call is placed to the
Target Phone number with
either G711 a-LAW or G711
u-LAW as per user selection on
the Settings screen. After SIP
signaling is completed, data
flows across the network and the
measurement statistics appear
in the Test Result Display
Window. The user can save the
test results to the
CompactFlash
TM
using the Save Results button.
Once the test stops, the SIP signaling log can be seen when user
clicks on Details button. Graphical plots of the VoIP test results
with respect to time can also be viewed offline. For further
information on this topic refer to the section below.