Filter
Top Products
Network Testing with the FrameScope Pro 2
Running an Autotest
Agilent FrameScope Pro User’s Manual 31
For more details, see “Network Performance Autotest” on
page 129.
7 When you have finished setting up
the test, press the Start Test button
(or press OK) on the Network
Autotest Setup screen. The test will
begin.
8 To stop the test at any time press the
Stop Test button.
9 To view information about a network
element’s results, select the element
from the list and press the Details
button.
10 Press the Save Results button to store
the test data on the CompactFlash™
card.
The rating numbers will range from 5 to
1, where 5 is best and 1 is worst. A red
‘X’ will be displayed if an error
occurred during the test. See the next
section for how to change the metrics
used to derive the ratings.