Filter
Top Products
8
Product Description
continued
LEDs:
Table 2
The Share-UPS
LEDs
provide important information con-
cerning operation of the unit. Refer to the table below for a
description of the conditions indicated by the
LED
.
Configuration
DIP switches
The Share-UPS Configuration DIP switches control the
shutdown operation of the unit. See “Configuring Share-
UPS” on page 23.
Continued on next page
IF the LED
labeled…
is… THEN Share-UPS…
Power
on is
p
owered on.
flashin
g
is not workin
g
p
ro
p
erl
y
.
Status
on
has established communication
with the UPS.
off
has lost (or has not established)
communication with the UPS.
flashin
g
failed the self-test.
On Batt
on
is detectin
g
an On Batter
y
condition
in the UPS (unless the UPS is on bat-
ter
y
durin
g
a self-test or is
p
erform-
in
g
a run time calibration).
off
is not detectin
g
an On Batter
y
con-
dition in the UPS.
Lo Batt
on
is detectin
g
a Low Batter
y
condi-
tion in the UPS.
off
is not detectin
g
a Low Batter
y
con-
dition in the UPS.
Table 2: LEDs