Filter
Top Products
21
Connecting Share-UPS
Connection
procedure
To connect the devices, perform the following steps in the
order given.
1 Verify that all protected loads are powered by the
same UPS to which the Share-UPS unit will be
connected.
2 Verify that no shutdown software is running.
3 Connect the To UPS cable of the Share-UPS unit
to the Computer Interface port on the back of your
UPS. Fasten securely.
4
If daisy-chaining multiple Share-UPS units
:
Connect the To UPS cable of each subsequent
Share-UPS unit to port 1, the Advanced port, of
the previous unit.
Note: When connecting multiple Share-UPS units,
you must configure all units identically. See
“Configuring Share-UPS,” on page 23.
5
If using Optional Power input (see “Optional
Power input” on page 9)
: Plug the external power
adapter into the UPS and into the Optional Power
input on the rear panel of the Share-UPS unit (or
the first unit in a daisy chain).
Continued on next page