Filter
Top Products
35
UPS Status Display
Menu
description
The UPS Status display provides factory information on the
connected UPS, output and load readings, battery informa-
tion, and Measure-UPS accessory readings (if attached). To
access the UPS Status display, type
s
from the Main menu.
UPS Status
display:
Figure 6
The following figure shows the UPS Status display.
Figure 6:UPS Status display
UPS Status
display
definitions:
Table 7
The following table describes the items that appear on the
UPS Status display.
Continued on next page
------------------------- MATRIX 5000 -----------------------
Utility Line: 213.1 VAC Battery Info
UPS Output: 248.7 VAC -----------------------
UPS Load: 013.0 % Voltage: 55.62 VDC
Run Time: 0113 min Capacity: 100.0 %
Load Power: 015.4 VA Smart Cells: 002
Load Current: 04.26 A Bad Cells: 000
UPS Temp: 024.3 C Batt Date: 04/28/97
Freq: 60.00 Hz Self Test: NO
UPS ID: UPS_IDEN Manuf Date: 04/28/97
UPS S/N: 80033718 F/W Rev: 5ZI
Status: On-Line
>
Item Description
Utility Line
The in
p
ut volta
g
e from the utilit
y
, in volts AC.
UPS Output
The out
p
ut volta
g
e to the load from the UPS,
in volts AC.
UPS Load
The connected load (in watts) as a
p
ercenta
g
e
of the rated ca
p
acit
y
of the UPS.
Table 7: UPS Status display definitions