Filter
Top Products
29
Chapter 3 Using the Share-UPS Menus
Using the Management Port
Introduction
The Management port of Share-UPS allows you to connect
a modem or DTE (data terminating equipment—a dumb
terminal or a computer running terminal emulation soft-
ware) to the Advanced port (port 1) of Share-UPS. Upon
establishin
g
communications with Share-UPS throu
g
h the
Management port (see “Logging on to Share-UPS” on page
31), you will access the Share-UPS menus. The Share-UPS
menus provide the following features:
• Out-of-band notification
• UPS status display
• UPS control
• Share-UPS configuration
The next paragraphs in this section describe these features.
Out-of-band
notification
When you use Share-UPS with an external modem and a
pager, Share-UPS can notify system administrators of prob-
lems, such as:
• UPS is operating on battery
• UPS has returned to On Line status (utility power
restored)
• UPS has a low battery
• UPS has been shut down
• Battery needs replacement
• Abnormal UPS conditions or faults
Continued on next page