Filter
Top Products
14
Key Concepts
continued
Setup overview
To set up Share-UPS, you will be required to perform the
following procedures as applicable:
1 If you are using Share-UPS with other APC acces-
sories: Determine where to install Share-UPS with
respect to other accessories. See “Installing Multi-
ple Accessories” on page 15.
2 Install Share-UPS. See “Installing Share-UPS” on
page 18.
3 Connect the protected devices. See “Connecting
Share-UPS” on page 21.
4 Configure Share-UPS for automatic shutdown:
a Set the Configuration DIP switches. See “Con-
figuring Share-UPS” on page 23.
b Access the Share-UPS menus through the Man-
agement port to complete configuration. See
“Using the Share-UPS Menus” on page 29.
5 Test the operation of Share-UPS. See “Testing
Share-UPS” on page 28.