APC AP5616 Switch User Manual


 
115
Dimensions
Height x Width x
Depth
4.37 x 43.18 x 27.98 cm
1.72 x 17 x 10.98 in; 1-U form factor
Weight 3.31 kg (7.3 lb) without cables
Heat Dissipation 105 BTU/hr
Airflow 8 cfm
Power consumption 30 Watts
AC-input power 40 Watts maximum
AC-input voltage rate 100 to 240 V AC autosensing
AC-input current
rating
0.5 A RMS maximum
AC-input cable 18 AWG three-wire cable:
IEC-320 C13 to 5-15P
IEC-320 C13 to IEC-320 C14
AC frequency 50 to 60 Hz autosensing
Ambient atmospheric condition ratings
Temperature 0
o
to 40
o
Celsius (32
o
to 104
o
Farenheit) operating
-40
o
to 70
o
Celsius (-40
o
to 158
o
Farenheit) nonoperating
Humidity 20 to 80% noncondensing operating
5 to 95% noncondensing nonoperating
Safety and EMC approvals and markings
UL, FCC, cUL, ICES-003, CE, VCCI, GOST, IRAM, C-Tick, MIC
Safety certifications and EMC certifications for this product are obtained
under one or more of the following designations: CMN (Certification Model
Number), MPN (Manufacturer’s Part Number) or Sales Level Model
designation. The designation that is referenced in the EMC and/or safety
reports and certificates are printed on the label applied to this product
User Consoles
Type PC running Windows NT, 2000 or XP OS and Network Access Software.
Minimum
Configuration
300MHz Pentium III,
64 MB RAM, 100BaseT NIC, XGA Video
Recommended
Configuration
450 MHz Pentium III,
128 MB RAM, 100BaseT NIC, SXGA Video
Table F.1: APC 2x1x16 Digital KVM switch product specifications (Continued)