Filter
Top Products
Chapter 4: Network Access Software 46
To change information properties:
1. Select a KVM switch or server in the Unit list.
2. Select View - Properties from the Network Access Software menu.
— or —
Click the Properties task button.
— or —
Right-click on the unit.
Select Properties from the pop-up menu. The Properties dialog box appears.
3. Click the Information tab. You may enter any information in the following fields.
a. In the Description field enter 0-128 characters.
b. In the Contact field enter 0-128 characters.
c. In the Contact Phone Number field enter 0-64 characters.
d. In the Comments field enter 0-256 characters.
4. Click OK.
Connections properties
Connections properties appear only for servers and are read-only. The display indicates the
physical connection path that will be used to access this server and the connection type, such as
serial or video.
To view connections properties:
1. Select a target device in the Unit list.
2. Select View > Properties from the Network Access Software menu.
— or —
Click the Properties button.
— or —
Right-click on the unit. Select Properties from the pop-up menu.
The Properties window opens.
3. Click the Connections tab.
VNC Properties
When you indicate a user-specified VNC application, you may include its command line
arguments. A selection of macros is available for placement in the command line; this may be
useful for automatic replacement of variables such as IP address, port number, user name and
password. For VNC commands that do not provide their own GUI, such as those for computers