Filter
Top Products
Chapter 4: Network Access Software 49
Click the Properties task button.
— or —
Right-click on the unit. Select Properties from the pop-up menu. The Properties
dialog box appears.
3. Click the Telnet tab.
4. For servers only, in the IP Address field, enter an IP address in dot notation or enter a 1-128
character domain name. Spaces are not allowed. Duplicate addresses are allowed.
5. In the Port field, enter a port number in the range 23-65535. If blank, port 23 is used.
6. Enable or disable the Use Default by marking or clearing the checkbox. When enabled, the
default global setting specified in Options will be used and all other portions of the Application
to Launch area are disabled.
7. Enable or disable the Launch built-in application by marking or clearing the checkbox. When
enabled, the built-in Serial Console Viewer application will be used to connect to this unit. If
you enable the Launch built-in application checkbox, you may also enable or disable the Open
Window before login checkbox. When this checkbox is enabled, the Serial Console Viewer
Telnet window will open before any login attempt is made to the server. This feature is useful
when debugging a login script, and is usually disabled otherwise.
8. Enable or disable the Launch user-specified application by marking or clearing the checkbox.
When enabled, the Telnet application specified in the field below the checkbox will be used.
a. Enter the directory path and name or click the Browse button to locate the path and name.
b. Enter command line arguments in the box below the path and name.
c. To insert a predefined macro at the cursor location in the command line, click the Insert
Macro list box and select a macro from the drop-down menu. Network Access Software
will automatically replace these variables when the application runs.
d. Enable or disable the Launch in command window by marking or clearing the checkbox.
When enabled, the
user-specified Telnet application will be launched from within an OS command window.
9. Click OK.
Customizing Options
Set general options for the Network Access Software in the Options window. General options
include custom field names, selected view on startup, browser application and DirectDraw support.
Viewing and changing general options
You can customize options for the Network Access Software, including custom name fields,
default view and default browser.