Filter
Top Products
Advanced Management
Page 7-4
.
Figure 7-1 Spanning Tree Configuration Menu
Configuring STP
Parameters
The IntraSwitch is shipped with the following STP default
values:
❏ STP Status — enabled
❏ Switch Priority — 0 x 8000
❏ Maximum Age — 20 seconds
❏ Hello Time — 2 seconds
❏ Forward Delay — 15 seconds
▲ Important! You should NOT configure any
STP parameters unless you have knowledge and
experience with the IEEE 802.1d specification.
Current Settings
6216M Book Page 4 Wednesday, January 27, 1999 5:26 PM