Filter
Top Products
VLAN Management
Page 9-18
If tagging for the port is disabled, then the following warning
message appears on the screen:
Normal port can't belong to more than one VLAN.
Enable Tagging first, press any key to continue…
See the "Toggle VLAN Tagging" section above for details on
enabling tagging for a port.
Adding VLANs to a
Tagged Port
You can make a tagged port a member of more than one VLAN
Group at a time. Use option a for this purpose. The difference
between this and option m is that, while m option overwrites
the existing map, the a option adds to the existing map. To add
VLANs to a tagged port, press a in VLAN Port Attribute
Configuration Menu. The following message appears:
Enter VLAN Group #s separated by space >
Enter the VLAN Group numbers, separated by spaces, at the
prompt and press return.
∆ Note: Option a is specific to tagged ports only.
If option a is selected for a normal port, a warn-
ing message appears:
Cannot add VLANs to Normal Port,
Press any key to continue
Removing VLANs
from a Tagged Port
VLANs may be removed from a tagged port. This option is
provided to make your life easier when you want to remove one
or more of many VLANs of which the tagged port is a member.
To remove VLANs from a tagged port, press r in VLAN Port
Attribute Configuration Menu. This displays the following
message:
Enter VLAN Group #s separated space >
Enter VLAN Group numbers, separated by spaces, and press
return. This removes requested VLANs from the tagged port.
6216M Book Page 18 Wednesday, January 27, 1999 5:26 PM