Filter
Top Products
Setting Up For Management
Page 4-4
2
Make sure both units are powered on.
If using a PC or Mac with a terminal emulator to
connect to the Console port, make sure it is con-
figured with the following terminal settings:
❏ Baud rate: 9600
❏ Data Bits: 8
❏ Parity: None
❏ Stop Bits: 1
❏ Flow Control: None
3
Once connected, the Local Management Inter-
face Main Menu appears on the screen, as
shown in Figure 4-2.
Figure 4-2 Local Management Interface Main Menu
See Chapter 5, “Console Management,” for infor-
mation on using the Local Management Inter-
face to manage the IntraSwitch and any installed
expansion modules.
▲ Important! A password is needed to access
the Configuration Menu. The default password
is Asante. The password is case-sensitive.
6216M Book Page 4 Wednesday, January 27, 1999 5:26 PM