Filter
Top Products
Console Management
Page 5-10
Changing System Administration Information
To change the IntraSwitch’s name, location, or contact
information:
1
Open the System Administration Configura-
tion Menu by typing a in the Configuration
Menu.
2
Type the command letter of the item to be
changed in the System Administration Config-
uration Menu.
3
Type the information at the prompt.
See Table 5-4 for a description of each param-
eter.
∆ Note: Each parameter is limited to 64 char-
acters, including spaces.
To cancel a selected option, press ctrl-c at
the command prompt.
4
Press Return.
The IntraSwitch’s system administration
information is changed.
To quit and return to the Configuration
Menu, type q.
System IP Configuration
This menu displays and allows you to change the information
needed to access the IntraSwitch over the network via in-band
management.
To access the System IP Configuration Menu, type i in the
Configuration Menu. A screen similar to Figure 5-5 appears.
6216M Book Page 10 Wednesday, January 27, 1999 5:26 PM