Filter
Top Products
VLAN Port Attribute Configuration
Page 9-21
Table 9-4 Configuration used in example of tagging
Status of Ethernet Segments in Example:
❏ All the stations on ethernet segment E1 and E6
can talk between themselves, but they can't talk
with stations on other ethernet segments since
E1 and E6 belong to VLAN Segment V1 and other
ethernet segments do not belong to V1.
❏ All stations on E2 and E7 can talk between them-
selves and not with stations on other ethernet
segments.
❏ All stations on E5 and E10 can talk between
themselves and not with stations on other ether-
net segments.
❏ Stations on E3 and E4 can talk only between
themselves. Likewise stations on E8 and E9 can
talk only between themselves.
❏ Though stations on E3,E4, E8 and E9 all belong
to the same VLAN Segment, V4, the stations on
E3 and E4 can't talk with stations on E9 and E10
since ethernet segment E11 does not belong to
VLAN Segment V4.
Port
#
VLAN
Group
Segment #s
Tagging Connection
1 V1, V5, V10 Enabled SW1 and SW2 connected
2 V1 Disabled SW1 and SW2 not connected
3 V5 Disabled SW1 and SW2 not connected
4 V4 Disabled SW1 and SW2 not connected
5 V4 Disabled SW1 and SW2 not connected
6 V10 Disabled SW1 and SW2 not connected
6216M Book Page 21 Wednesday, January 27, 1999 5:26 PM