Filter
Top Products
Console Management
Page 5-12
Changing System IP Information
To change the IntraSwitch’s IP address, subnet mask, or
default router information:
1
Open the System IP Configuration Menu by
typing i in the Configuration Menu.
2
Type the command letter of the option you
want to change.
3
Type the new address at the prompt.
See Table 5-5 for a description of each
address.
▲ Important! Follow the format: num-
ber.number. number. number.
To cancel, press ctrl-c at the command
prompt.
4
Press Return.
The IntraSwitch’s IP information is changed.
To quit and return to the Configuration
Menu, type q.
Bootstrap Configuration
This menu displays (and allows you to change) the bootstrap
parameters used for loading the IntraSwitch’s software at
startup, and for downloading a new version of software when
one is issued.To access the Bootstrap Configuration Menu, type
b in the Configuration Menu. A screen similar to Figure 5-6
appears.
6216M Book Page 12 Wednesday, January 27, 1999 5:26 PM