Filter
Top Products
SNMP Configuration
Page 5-17
SNMP Configuration
This menu displays the unit’s SNMP (Simple Network
Management Protocol) Configuration Menu.
This menu allows you to configure the unit’s read and write
community strings. It also allows you to specify which of your
network management stations will receive traps from the
IntraSwitch.
To access this, type n in the Configuration Menu. See Figure 5-7
.
Figure 5-7 SNMP Configuration Menu
Current Settings
Table 5-7 explains each setting on the SNMP Configuration
Menu.
For information on using the menu, see:
❏ “Changing Community Strings” — page 5-18
❏ “Enabling Traps” — page 5-19
❏ “Adding a Trap Receiver” — page 5-19
❏ “Deleting a Trap Receiver” — page 5-20
Current Settings
6216M Book Page 17 Wednesday, January 27, 1999 5:26 PM