Filter
Top Products
Rack Mounting/Desktop Placement
Page 2-3
Table 2-1 Installation Overview
Rack Mounting/
Desktop
Placement
The IntraSwitch can be installed in a standard 19-inch
equipment rack. It can also be placed on a stable horizontal
surface with support capabilities of 12 pounds (5.4 kilograms).
Equipment Rack
Installation
To install the unit in an equipment rack, use the following
procedure. Refer to Figure 2-1 below.
Figure 2-1 IntraSwitch Rack Installation
Step Action
1 (required) Open the box and check the contents.
See “Package Contents” on page 1-7 for a complete
list of the items included with your IntraSwitch.
2 (optional) Install MII expansion module(s), if any.
See “Installing MII Modules” on page 2-5.
3 (required) Install the IntraSwitch in an equipment rack or prepare
it for desktop placement.
See “Rack Mounting/Desktop Placement” on page 2-3.
4 (required) Connect the power supply.
See “Connecting Power” on page 2-6.
5 (required) Connect network devices to the IntraSwitch.
See “Connecting to the Network” on page 2-6.
6 (optional) Configure the IntraSwitch for management
capabilities.
See “Configuring for Management” on page 2-8.
1357
Switched 10/100Mbps Ports
Console
Power
100Mbps
FDP
Data
Link
Utilization
24
911
24681012
13 15 17 19 21 23
14 16 18 20 22 24
>1 3 5 10 25 5075 90<
2345678910111213141516
17 18 19 20 2122 23
1
IntraSwitch
6224
6216M Book Page 3 Wednesday, January 27, 1999 5:26 PM