Filter
Top Products
Console Management
Page 5-46
3
Press Return.
The Telnet Idle Time-out Period is changed.
After configuring the desired time-outs, type q to return to the
previous menu.
Changing the Password
The Change Password option allows you to change the
password needed to access the Configuration Menu.
▲ Important! The factory default password is
Asante. The password is case--sensitive.
To change the current Local Management Interface (Console)
password:
1
Type c in the Configuration Menu.
2
Type current password at the prompt.
3
Type a new password at the “Enter Current Pass-
word” prompt.
▲ Important: The password is case-sensi-
tive. The password must be a minimum of
one character and a maximum of 20 char-
acters in length. The password takes any
ASCII code.
4
Press Return.
5
Type the new password again at the confirma-
tion password prompt.
To cancel this change, type ctrl-c.
6
Press Return.
The password is changed.
Type q to return to the Configuration Menu.
6216M Book Page 46 Wednesday, January 27, 1999 5:26 PM