Filter
Top Products
Console Management
Page 5-32
Enabling the Duplicated-IP Trap
The IntraSwitch logs the duplicate IP address along with the
owner and spoofer MAC address in the trap log which can be
displayed using the l command in the Forwarding Database
Security Configuration menu, and also sends a trap to the
receiving trap stations if a duplicate IP address is detected.
To enable the Duplicated-IP Trap:
1
Open the Forwarding DB/Security Con-
figuration Menu by typing f in the Configu-
ration Menu.
2
Type t to toggle the Duplicated-IP Trap to
enabled.
The Duplicate-IP Trap is enabled. Its status
appears at the top of the screen next to
“Duplicate-IP Trap:.”
Viewing the Trap Log
The trap log displays all of the traps that the IntraSwitch has
generated since the last time the log was cleared.
∆ Note: The trap log holds a maximum of 128
entries.
1
Open the Forwarding DB/Security Con-
figuration Menu by typing f in the Configu-
ration Menu.
2
Type l to display the trap log.
The trap log appears, displaying the last 128
traps the IntraSwitch has generated (or the
number of traps the IntraSwitch has gener-
ated since the last time the log was cleared).
3
Press any key on your keyboard to exit the
trap log and return to the Security Configura-
tion Menu.
6216M Book Page 32 Wednesday, January 27, 1999 5:26 PM