Black Box 5250 Computer Hardware User Manual


 
102
5250 REMOTE EMULATOR CARD
Appendix C: Typestyle (FGID)
Tables
The tables on the following pages list the IBM typestyle numbers (font IDs)
that the 5250 Remote Emulator Card uses to select fonts internal to the
printer and from HP font cartridges. Font-change commands for each font
are also listed (see Section 8.4.1). As on the cartridges themselves,
cartridge fonts are listed in ascending order by pitch.
Typestyle numbers with an asterisk (*) next to them are acceptable IBM
font IDs for device configuration and OCL or CL printer commands (in
hexadecimal). Typestyle numbers in parentheses are alternatives that more
closely match the IBM CPI spacing of the font.
Font-change commands begin with a logical not (¬), which is [UPPER
SHIFT] [6] on U. S. keyboards. The caret (^) symbol may be substituted in
non-U.S. applications.
Remember that you can’t right-justify proportional fonts with the IBM
justify command.
C.1 5219 Emulation
Tables C-1 and C-2 on the next few pages list IBM typestyle numbers (font
IDs) and font-change commands for resident (internal to the printer) HP
LaserJet fonts and HP font cartridges with the 5219 printer emulation.
NOTE
Typestyle number 86 prints the resident 10-CPI Courier font at 12 CPI
spacing in portrait (¬QXM). Typestyle number 85 prints the resident 16-
CPI Line Printer font at 12-CPI spacing in landscape (¬QXN).