Black Box 5250 Computer Hardware User Manual


 
92
5250 REMOTE EMULATOR CARD
Appendix A: Names of Executable
Files
This appendix lists the filenames for the executable programs included
with the 5250 Remote Emulator Card’s software. An executable program is
a set of step-by-step instructions the computer follows to complete a task.
Some of the programs listed here are meant to be run directly by the user
and some are meant to be executed by the emulator (“called” by the
emulation program).
A.1 User-Run Programs
EM5251R.EXE The main emulation program. To execute this
program at a DOS prompt, change to the
emulation software’s directory and type EM5251R.
EMDIAG.EXE This utility program checks for communication
between the PC and the 5250 Remote Emulator
Card. If this test is successful, the program checks
for communication with the modem.
EMKBCHK.EXE This utility program helps to determine which type
of keyboard is being used. To execute this program
at a DOS prompt, change to the emulation
software’s directory and type EMKBCHK.
RCONFIG.EXE The configuration program. To execute this
program at a DOS prompt, change to the
emulation software’s directory and type RCONFIG.
SAVEKEYS.EXE Use this program to save keystrokes recorded
during the record/playback feature. You will need
to hotkey out of emulation before you can run this
program. At the DOS prompt, change to the
emulation software’s directory and type
SAVEKEYS.
WININST.EXE This program adds the emset command to the
WINSTART.BAT file. If WINSTART.BAT does not
exist, WININST will create it. At the DOS prompt,
type WININST.