Filter
Top Products
52
5250 REMOTE EMULATOR CARD
7.2.4 C
OPYING FROM
E
MULATION TO A
D
OCUMENT
To copy from emulation to a document, follow these steps:
1. Put the screen in a window by pressing [ALT][ENTER].
2. Bring up the System Menu by clicking on the system menu’s “minus
button” located in the upper left-hand corner of the screen.
3. Select Edit
.
4. Select Mark.
5. Using the mouse, mark the text to be copied.
6. Open the clipboard in Windows.
7. Open Display and select OEM text.
8. Go to the document where the paste will take place.
9. Select Paste.
7.2.5 C
OPYING FROM A
D
OCUMENT TO
E
MULATION
To copy from a document to emulation, follow these steps:
1. Cut the data using the normal sequence for the program.
2. Put the screen in a window by pressing [ALT][ENTER].
3. Put the cursor where the paste will take place.
4. Bring up the System Menu by clicking on the system menu’s “minus
button” located in the upper left-hand corner of the screen.
5. Select Edit
.
6. Select Paste.
7.3 Hotkey Sequences
7.3.1 O
VERVIEW
Hotkey sequences are used to toggle from one session to another.
For example, press and hold the [ALT] key and press the [ESC]
key (or press the custom hotkey sequence you chose during the
configuration—see Section 6.3.2) to move from a DOS session
to a host session.
––
––