Black Box 5250 Computer Hardware User Manual


 
43
5250 REMOTE EMULATOR CARD
(text continued from page 40)
Save Buffer: If you’re going to use 132-column screens with DOS
graphics applications, you’ll need to allocate extra memory to make
sure these screens are saved when you hotkey between sessions. Select
32K
for 132-column screens used in DOS graphics applications, 16K
for all other screens.
6.3.2 K
EYBOARD
S
ETUP
Use the Keyboard-Setup Menu, shown in Figure 6-9 below, to customize
the keyboard. You can modify the hotkey, enable or disable the type-ahead,
and modify scan codes.
Figure 6-9. The Keyboard-Setup Menu.
Hot Key Code: The Hot Key Code is the series of keystrokes used
to jump from a DOS session to a host session. The default is
[ALT][ESC]. You can customize the hotkey code by pressing
[ENTER] at this option. A new screen displaying the keyboard type
will appear. Press the key you want to combine with [ALT] to form
the hotkey, then press [ENTER].
Menu Command Options:
Change Option Select Options <ESC> Previous Screen
Modify / Create /Delete / Exit File Name = EM5251R
______________________________
Keyboard Setup
Hot Key Code Alt <01> Press ENTER to
modify
Type Ahead Enabled
Scan Code Customize
" "
Define hot key sequence