Filter
Top Products
18
5250 REMOTE EMULATOR CARD
4. Hardware Installation
4.1 System Requirements
4.1.1 PC R
EQUIREMENTS
You must have these PC resources to use the 5250 Remote Emulator Card:
• IBM PC, PC/XT™, AT
®
, 386, 486, or compatible personal computer
that does not use the Micro Channel
®
Architecture
• Floppy-diskette drive
• DOS version 3.3 or higher
• 225K of RAM + 11K per display session + 29K per printer session
4.1.2 H
OST
R
EQUIREMENTS
You must have these host resources to use the 5250 Remote Emulator
Card:
• IBM System/34, /36, /38, or AS/400
• Synchronous communications port that supports the SDLC protocol
4.2 The Complete Package
When you receive your Card, check the package it came in for water- or
shipping damage; contact the carrier if you find any. The package should
contain the following:
• (1) 5250 Remote Emulator Card
• (1) 3.5" software diskette
• (1) copy of this manual
Keep the original packaging in case the Card must be reshipped. If your
system requires 5
1
⁄4" diskettes, please contact your supplier.