Black Box 5250 Computer Hardware User Manual


 
83
5250 REMOTE EMULATOR CARD
Table 9-1 (continued). Error Codes.
SRC Description Possible Causes(s)
0056 It has been at least 30 seconds The remote controller has been
since any valid SDLC frame has varied off at the host.
been received for any address.
However, valid frames were
received earlier.
This error code will not be
displayed if the Controller has
received any good SDLC frames
for any SDLC address in the last
30 seconds. This is true even
if the address in the frame is not
the address configured for the
remote controller, or any of the
addresses configured for a
multi-card Controller.