Filter
Top Products
29
5250 REMOTE EMULATOR CARD
Figure 6-1. The configuration program’s Main Menu.
3. Use the cursor arrow keys to move the highlighted block on the top
of the Main Menu to one of these options: Modify
, Create, Delete,
or Exit
. Press [ENTER] to select your choice. (Modify changes the
current configuration. Unless there is a need for more than one
configuration, choose this option. Select Create
if a new
configuration is needed.)
6.1.2 M
ODIFY OR
C
REATE A
C
ONFIGURATION
To change an existing configuration, select Modify from the Main Menu.
The default configuration file is named EM5251R
. You might want to
modify the default configuration file, rather than create a new one, to
reduce the amount of disk storage.
To create a new configuration file, select Create
from the Main Menu.
This creates and stores a new file. Type the new file name, then press
[ENTER].
When you select Modify
or Create, the “Operating Environment” setup
screen appears. You will be prompted to select one of these options:
1) Terminal Emulation Only
2) PC Support/400 Only
3) Terminal Emulation and PC Support/400
Menu Command Options:
Change Option ↵ Select Options <ESC> Previous Screen
Modify / Create /Delete / Exit File Name =
________________________________
Modify an existing configuration file.
Remote 5250 Configuration Utility
Version x.x
Copyright © 1993 SDE Corp.
When finished, select Exit, then type EM5251R <filename>
to enter emulation.