Black Box 5250 Computer Hardware User Manual


 
49
5250 REMOTE EMULATOR CARD
6.4 PC Support/400
If PC Support/400 was selected for installation, the adapter-handler screen
will appear (as shown in Figure 6-11 below) and will prompt you to enter
the correct path for PC Support (this is required for PC Support/400
only).
NOTE
PC Support 400 must be installed as a twinax connection, not SDLC.
Figure 6-11. The adapter-handler screen.
Menu Command Options:
Change Option Select Options <ESC> Previous Screen
Modify / Create /Delete / Exit File Name =
________________________________
Configure PC Support/400 to use with EM5251R.
C:\PCS\STARTPCS.BAT
If PCS startup file is not at the default, please enter
correct path name. Press enter to continue, or press ESC
to abort PCS configuration.