Black Box 5250 Computer Hardware User Manual


 
31
5250 REMOTE EMULATOR CARD
6.1.2 D
ELETE A
C
ONFIGURATION
To delete a configuration file, select Delete from the Main Menu. The
program displays a list of up to eight of these files. (You can create more
than eight configuration files, but the program is only able to display the
first eight in this menu. Move the cursor to the file you want to delete and
press [ENTER]. You will be prompted,
Are you sure you want to delete this file (y/n)?
Press Y and then [ENTER] to delete the file. Press N and then [ENTER]
to return to the Main Menu.
6.1.3 E
XIT THE
C
ONFIGURATION
P
ROGRAM
After you’ve finished selecting your configuration options, press [ESC]
until this prompt appears:
Do you want to save this configuration? (y/n)
Press Y to save the new configuration, or press N to discard the changes,
then press [ENTER]. If you selected either Option 2, PC Support/400
Only, or Option 3, Terminal Emulation and PC Support/400, you will
now be prompted to enter the correct path. Finally select Exit
to end
the program, then press [ENTER] to return to the DOS prompt.
6.2 Basic Configuration
These are the Basic Configuration options:
Host cable addresses
Basic setup options for the PC
• Language type
SDLC parameters
6.2.1 C
ABLE
A
DDRESSES
At the Configuration Menu, move the cursor to Host Cable Addresses
and press [ENTER]. The Cable Addresses Menu appears, as shown next
in Figure 6-3.