Filter
Top Products
INTEGRUS | Installation and User Instructions | Integrus Transmitters en | 28
Bosch Security Systems | 2005-04 | 3122 475 22015en
Example 3: Set channel 11 to transmit a Stereo signal
in Premium Quality, using audio inputs
14 (L) and 15 (R) as source.
(See also section 2.5.10.)
Transmitter
32 Channels
4 Setup ...
4
A Transmission
On
4
D Ch. Quality
All Mono SQ
4D Ch. Quality
All Mono SQ
4D Ch. Quality
All Mono SQ
4D Ch. Quality
All Mono SQ
4D Channel 11
Mono SQ In 10
4D Channel 11
Mono SQ
In 10
4D Channel 11
Stereo PQ
In 10
4D Channel 11
Stereo PQ In 12
4D Channel 11
Stereo PQ In 12
1. Turn the button to select
the ‘Setup’ item (4) in
the Main menu.
2. Push and hold the but-
ton for 3 seconds to go
to the ‘Setup’ sub-menu.
3. Turn to select the ‘Chan-
nel Quality’ sub-menu
item (4D).
4. Push to confirm.
5. Turn to move the cursor
to the option on the sec-
ond line.
6. Push to confirm.
7. Turn to select the option
value ‘Per Channel ...’.
8. Push to go to the ‘Chan-
nel’ sub-menu (4C).
9. Turn to select the
required channel num-
ber (11).
10. Push to confirm.
11. Turn to move the cursor
to the quality option.
12. Push to confirm.
13. Turn to select the
required quality value
(Stereo PQ).
14. Push to confirm. *
15. Turn to move the cursor
to the input number.
16. Push to confirm.
4D Ch. Quality
Per Channel ...
4D Channel
00
Mono SQ In 00
4D Channel
11
Mono SQ In 00
4D Channel 11
Mono SQ In 10
* Note that after selecting ‘Stereo’ as input mode
(step 14) the input number changes automatically
to the next even number (12), which is the input
number of the left signal.