Filter
Top Products
INTEGRUS | Installation and User Instructions | Integrus Transmitters en | 40
Bosch Security Systems | 2005-04 | 3122 475 22015en
The sensitivity screens also displays a level meter for a visu-
al indication of the actual signal strength: ■ = low level,
■
= high level, ▲ = overflow.
Menu Items Options Value Description
4L Sens.Input nn
Input nr.: Level:
00 ... 31 -6... +6 dB Select which input to set and select the required sensitivity.
Per Input Sensitivity settings:
2.5.16 Enable / disable IR-monitoring
The mini IR-radiator at the front of the transmitter can
be used for monitoring the IR-signal. When required
(e.g. for security reasons) this option can be switched
off (menu 4M).
Menu Items Options Description
4M Mini Radiator Enabled
or Dis
abled
Enable or disable the mini IR-radiator at the front of the transmitter.
Menu Items Options Value Description
4J Level.Aux.L L
evel:
-6 ... +6 dB Set the required sensitivity for the left auxiliary input.
4K Level.Aux.R L
evel:
-6 ... +6 dB Set the required sensitivity for the right auxiliary input.
4J Level.Inputs Mode:
Level:
- All -6 ... +6 dB Set the sensitivity of all audio inputs to a user defined level.
- Per Input ... Select this option to go to the ‘Per Input Sensitivity
Settings’ menu.
2.5.15 Set sensitivity of the inputs
The sensitivity of the audio and Aux. inputs can be set
in the Input Sensitivity menus (4J, 4K, 4L). The sensi-
tivity can be set the same for all audio inputs (menu
item 4L) or for each audio input separately.
2.5.17 Enable / disable headphone output
The headphone output at the front of the transmitter
can be used for monitoring the input-and channel sig-
nals. When required (e.g. for security reasons) this
option can be switched off in menu item 4N.
Menu Items Options Description
4N Headphone Enabled
or Disabled Enable or disable the headphone output at the front of the
transmitter.