Filter
Top Products
INTEGRUS | Installation and User Instructions | Integrus Transmitters en | 38
Bosch Security Systems | 2005-04 | 3122 475 22015en
Menu Items Options Description
4G C.Settings ... Push the button to go to the sub-menu.
4G Carrier n
Carrier nr.:
0 ... 7 Select which carrier to configure.
St
atus:
- Disabled The selected carrier is disabled (off).
* - Enabled The selected carrier is enabled (on).
2.5.13 View carrier assignments
With menu option 4H the carrier assignment can be
seen, i.e. which channels are transmitted on each carri-
er. Note that the number of channels that can be dis-
tributed on one carrier depends on the chosen quality
mode. See examples below.
4H Carrier 1
Ch. 04 05 06 07
4H Carrier 4
Ch. 16 17 -- --
4H Carrier 5
Ch. 18 18 19 19
Channels 4, 5, 6, and 7 (all Mono
MQ) are assigned to carrier 1.
Channels 16 and 17 (both Mono MQ)
are assigned to carrier 4. Room for
more channels on same carrier.
Channels 18 and 19 (both Mono
PQ) are assigned to carrier 5.
2.5.12 Disable or enable carriers
Normally the channels are automatically assigned to
the available carriers. However, when the reception
quality of a specific carrier is not good, that carrier can
be disabled manually. The channels are then automati-
cally re-assigned to the next available carriers.
Each of the 8 carriers (0 to 7) can be disabled or
enabled in the Carrier Settings menu (4G).
Menu Item Options Description
4H C.Overview ... Push the button to go to the sub-menu.
4H Carrier n
Carrier nr.:
0 ... 7 Select which carrier to view.
Channel
numbers:
-00 ... 31 or -- Shows the channel numbers that are assigned to the selected
carrier. The symbol ‘- -’ is used when less than 4 channels are
assigned.