Filter
Top Products
INTEGRUS | Installation and User Instructions | Integrus Transmitters en | 34
Bosch Security Systems | 2005-04 | 3122 475 22015en
2.5.9 Set number of channels
Via sub-menu item 4C the number of channels that
will be used can be set. Note that the maximum num-
ber of channels depends on the transmitter type (4, 8,
16 or 32 channels) and the chosen quality modes.
When a DCN Next Generation or a DCN system is
connected to the transmitter, the number of channels
can be automatically set by the connected system.
Menu Items Option Description
4C Nr. of Ch. Nr
. of channels
* - Automatic: nn The number of used channels is set automatically to the maximum
possible number of channels (depending on transmitter type and
the selected quality modes). When a DCN Next Generation
or a DCN system is connected to the transmitter, the number of
channels is determined by the settings of the connected system.
- Manual: nn
Set the number of used channels (the maximum number depends
on the transmitter type and the selected quality modes).
An asterisk (*) is shown when the selected number is not possible
because it is higher than the maximum number of channels.