Filter
Top Products
INTEGRUS | Installation and User Instructions | Integrus Transmitters en | 39
Bosch Security Systems | 2005-04 | 3122 475 22015en
2.5.14 Configure auxiliary inputs
The way the signals on the auxiliary inputs (Aux-.L
and Aux.-R) are handled can be set in the Aux. Input
Mode menu (4I).
When the option ‘Stereo’ is chosen, the signals on both
Aux. inputs are distributed as a stereo signal to all
channels. This setting can for instance be used to trans-
mit a music signal during breaks in a conference. Note
that the Transmission mode must be set to ‘Aux to All’
(menu item 4A) to actually transmit this stereo signal.
The ‘Stereo to Mono’ and ‘Mono+ Emergency’ options
can be selected when the transmitter is used in combi-
nation with an interpretation system. The Aux. input(s)
will be distributed to the Symmetrical Audio Input and
Interpreters Module. In this configuration the ‘floor’
signal should be connected to the Aux. inputs.
Menu Items Option Description
4I Aux. Input Type:
* - Stereo The Aux. inputs will be distributed in stereo to all channels when
the transmission mode (menu item 1) is set to ‘Aux to All’.
- Stereo to Mono The Aux-L and Aux-R inputs are combined into a mono signal and
distributed to the Symmetrical Audio Input and Interpreters
Module (when present).
- Mono + Emergency The Aux-L input is distributed to the Symmetrical Audio Input and
Interpreters Module (when present). The Aux-R input is distributed
as emergency signal to all channels when the emergency switch
is closed.