Filter
Top Products
REMOTE FAX OPTIONS
8-7
MFC 4550/6550MC/7550MC
OP-US-5.0
Setting the Remote Access Code
The initial setting for the remote access code on your new fax is “159*”. You can
change this code if it conflicts with other equipment codes or if you just wish to.
Change the Remote Access Code frequently and use it as a “secret password” to limit
access to your REMOTE FAX OPTIONS.
When you use the Remote Access Code, you must press all four keys (three-digit
number plus *).
1. Press Function.
2. Press 8.
3. Press 3.
4. Enter a three digit number 000 to 999.
The last digit, an asterisk, can not be
changed.
Example: 160*.
The three digit number must not be the
same as the remote activation and
deactivation codes. (See page 6-14~17.)
Example: When the remote access code is
160*, don’t use 160 or 60* for the
activation and deactivation code.
5. Wait for two seconds.
6. Press Stop to exit.
KEYS TO PRESS
09/12/1996 15:25
ONLINE
ENTER NO. & SET
THE DISPLAY WILL SHOW:
8.REMOTE FAX OPT
3.REMOTE ACCESS
ACCESS CODE:159*
ACCESS CODE:160*
3.REMOTE ACCESS