Filter
Top Products
9-6
MFC 4550/6550MC/7550MC
OP-US-5.0
Turning on the Message Center with 3 Basic Steps
You can get started receiving messages by doing the following three steps.
1. Set the Message Storage.
2. Record the Outgoing Message (MSG CTR OGM).
3. Activate the Message Center mode, by pressing the Mode button until both Fax
and F/T LEDs are lit.
Setting the Message Storage
Setting the Message Storage is the first step in turning on the Message Center Mode.
Before you set the Message Storage, make sure you carefully read “Mode Settings at
a Glance” (see page 9-2). Once you decide the mode that best suits your needs, follow
the steps below.
KEYS TO PRESS THE DISPLAY WILL SHOW:
09/12/1996 15:25
ONLINE
ENTER NO. & SET
1.FAX
2.PRINTER
8.SETUP MSG CTR
1.MSG STORAGE
FAX:OFF
SELECT { } & SET
1.FAX
FAX:ON
1. Press Function.
2. Wait for two seconds.
3. Press 1.
4. Press 8.
5. Press 1.
6. Press Z (left arrow) or X (right arrow)
repeatedly to select ON or OFF.
Example: FAX: ON.
MESSAGE CENTER MODE SETTINGS GETTING STARTED