Filter
Top Products
6-19
MFC 4550/6550MC/7550MC
OP-US-5.0
Example) VOICE : EXT.
mode.
(TAD mode for MFC
4550)
Flowchart of External TAD Reception
Hookup
There is only one way you can hook up a Telephone Answering Device (TAD) on the
fax phone line. The TAD must be plugged into the back of the MFC in the jack labeled
EXT. Your machine can not work properly if you plug the TAD into a wall jack. Follow
these steps:
1. Plug the telephone line cord from the wall jack into the back of the machine in the
jack labeled LINE.
2. Plug the telephone line cord from your TAD into the back of the machine in the jack
labeled EXT. (Double check that the telephone line cord comes from the jack in the
TAD for telephone line and not for telephone set.)
3. Put your machine in TAD mode by turning both the Fax and F/T lights on. (If your
machine is MFC 6550MC or 7550MC, put it in Message Center mode and set
Message Storage to VOICE: EXT mode.)
4. Set your TAD to 4 rings or less. (The machine’s Ring Delay setting does not apply).
5. Turn the TAD’s Answer mode to ON.
6. Record the OGM (outgoing message) on your TAD as explained on the next page.
Incoming Call
The call is picked up
by the external TAD.
(Maximum 4 rings.)
The external TAD
outgoing message
begins.
The caller leaves a
voice message on the
external TAD.
The caller must
press your Remote
Activation Code
to activate the
fax machine.
The fax message is
received on paper.
The caller
can also
send a fax message.
Manual
dialed
fax call
Auto
dialed
fax call
Fax reception is
automatically
activated by
fax tones.
The fax message
is received on
paper.
Voice call
RECEIVING FAXES AND OTHER CALLS
CONNECTING TO A TELEPHONE ANSWERING DEVICE (TAD)