Filter
Top Products
2-3
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
MFC 4550/6550MC/7550MC
OP-US-5.0
Use TIMER to send your documents at a
later time.
Polling is the process of retrieving faxes
from another machine. ON/OFF
You can send a fax and then talk to the
recipient using the CALL RESERVE
function. ON/OFF.
There are three types of contrast settings.
Usually the AUTO setting is acceptable.
But if you want to send or copy an
especially light or dark document, you
should change this setting.
AUTO: Default is AUTO. Contrast
setting always reverts to AUTO
after one transmission.
S. LIGHT:To send very light documents.
S. DARK: To send very dark documents.
If you need to send a set of originals at
various resolutions, this function will
allow you to set the required resolution
page by page. (If all documents are the
same resolution, use the Resolution key.
See page 1-6 #27.)
STANDARD/FINE/S. FINE/PHOTO
If you have trouble when sending
overseas, you may want to set OVERSEAS
MODE to ON.
ON/OFF
If you wish to cancel a job that has been
set with the timer, a polled job etc., use
this function.
You can print several different lists and
reports, which are available under
function item 3. PRINT REPORTS.
If you register names and numbers on
One-Touch dial keys, you can dial a
number automatically just by pressing a
One-Touch key. (Max. of 24 locations)
<1. FAX MENU FUNCTIONS>
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
1. TIMER 5-10~11
2. POLLING
7-1~6
4. CONTRAST
5. RESOLUTION
1. TEMP.
(TEMPORARY)
SETTINGS
4. SET AUTO
DIAL
3-6~7
5-15
11-1~8
OFF
5-16
STAN-
DARD
5-17~18
AUTO 5-4
O F F 5-24~25
3. CALL
RESERVE
6. OVERSEAS
MODE
2. CANCEL
JOB
3. PRINT
REPORTS
1. ONE-TOUCH
DIAL
See page 11-1 for
a list of reports.
OFF