Filter
Top Products
TROUBLESHOOTING PROCEDURES
16-11
MFC 4550/6550MC/7550MC
OP-US-5.0
Check the following:
• The MFC is turned on.
• The toner cartridge and drum unit are installed properly.
• The interface cable is securely connected between the MFC
and computer.
• Check to see if the LCD is showing an error message. (See
page 16-2~4.)
The MFC does not print.
Recommendation
Question
Question
Sometimes I get a error
message, PRINT
OVERRUN when
printing certain
documents from
Windows
®
.
I can not print from my
application software.
• Make sure the Windows
®
printer driver is installed and you
selected it in your application software.
• If you use the optional serial interface, make sure the serial
slide switch of the serial interface is in the correct position and
the DIP switches interface settings are correctly set up. (Only
for MFC 6550MC/7550MC)
• If you are using the supplied Windows
®
driver, turn the error
recovery operation on in the Setup dialog box and try again.
• Reduce the print resolution or reduce the complexity of your
document and try again.
• Expand the printer memory by installing one of the optional
memory boards.
Recommendation
Q&A
This section contains questions and answers for using your fax machine. If you have
encountered a problem, find the question relating to your problem and take the steps
recommended to correct the problem.
Setting Up the MFC
Windows
®
Setup Printing Problems