Filter
Top Products
2-6
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
MFC 4550/6550MC/7550MC
OP-US-5.0
Information
Page
Level one
function
Factory
setting
Level two
function
Explanation of Options
3. INTERVAL
OFF
11-3~4
You can select the time interval at which
the activity report is printed.
6/12/24 hours, 2/4/7 days, OFF
You can enter your name or company
name, fax number and telephone number
in STATION ID.
It is printed at the top of each page of
every outgoing fax. It is also printed on
the automatic Cover Page.
If you enter a REMOTE CODE, you can
activate or deactivate the machine from a
remote telephone.
ON/OFF
You can register your own two custom
comments on the Cover Page.
Limits fax receiving to only from a fax
number stored as one of your One-Touch
numbers.
ON/OFF
When you use the application software
included into the MFC, you can select if
your PC connected to your MFC will
receive voice and fax messages.
ON/OFF
You can store the incoming fax messages
in the memory. Then you can use the
convenient remote control functions.
ON/OFF
You can choose either PAGING, FAX
FORWARDING or OFF. PAGING ON
will cause the MFC to page you when it
receives a fax message. FAX
FORWARDING ON will cause the MFC
to send any stored faxes that are received
to another predetermined fax number.
OFF/FAX FORWARD/PAGING
You can register the REMOTE ACCESS
CODE (3 digits) allowing you remotely
operate the machine. (Example:
Retrieving an incoming fax message)
You can print incoming faxes that were
stored in memory.
4. STATION ID
5. REMOTE
CODE
6. SET
COVERPAGE
3-3~4
ON
*51 (ACT.)
#51(DEACT.)
6-16~17
5-19~20
ON
See the
Multi-
Function
Link Pro
Manual
OFF 8-1
1. FAX STORAGE
8. MF LINK
1 5 9 * 8-7
8-11
3. REMOTE
ACCESS
4. PRINT FAX
7. SET
PASSWORD
OFF
6-31
8. REMOTE
FAX OPT
(Only for
MFC 4550)
2. FAX FWD/
PAGING
O F F 8-4~6
7. SETUP
SYSTEM