Filter
Top Products
2-5
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
MFC 4550/6550MC/7550MC
OP-US-5.0
This mode reduces the power consumption
when the machine is idle. The time period
before the machine drops into the mode is
user selectable.
You can adjust Print Density with this
function.
There are two different dial types and
you must select the type of signal suitable
for your telephone line.
TONE/PULSE
This is the number of rings before the
machine answers the call when in F/T or
Fax Mode.
0/1/2/3/4 rings
You can adjust the speaker volume with
this function.
OFF/LOW/HIGH
F/T RING TIME sets the time for
simulated ringing in F/T mode.
10/20/30/60 seconds
The settings are OFF/LOW/HIGH.
If you have distinctive ringing service
from your phone company, you can use
this function to register the ringing
pattern of your fax number. And if you set
it to ON, you can use the registered
number as a fax number only.
OFF/ON/SET
You can display the last 30 Caller IDs
that are stored in the memory.
If you enter the date and time in 24-hour
format, the LCD will display the date and
time and they will be printed on outgoing
faxes.
If you frequently have delayed jobs, all
for execution at same time each day, you
can program that time. Once you register
it, you do not have to enter that time, just
set Timer Transmission in temporary
settings.
Page
Factory
setting
Level two
function
Explanation of Options
Level one
function
00MIN 2-12~13
TONE
3-1
2 6-2~3
OFF
6-25~27
01/01/1997
00:00
3-2
6-28~29
1. DATE/TIME
7. SETUP
SYSTEM
7. CALLER ID
6. DISTINCTIVE
2. RING DELAY
1. TONE/PULSE
8. SLEEP MODE
6. TEL
OPTIONS
L O W 6-12
3. SPEAKER
VOLUME
HIGH 6-135. RING VOLUME
20 6-5~6
4. F/T RING
TIME
00:00 5-9
2. DAILY TIMER
9. PRINT
DENSITY
6-10
5. USER
OPTIONS