Filter
Top Products
TROUBLESHOOTING PROCEDURES
16-4
MFC 4550/6550MC/7550MC
OP-US-5.0
Maintenance
Turn off the power. Then contact the Customer
Service number listed on page 16-1.
• Press the FF/Cont switch to print the data
remaining in the MFC.
• If you have installed the Windows® driver,
try again after setting the True Type mode
to “Print as Graphics” in the PRINT menu
of your application software.
• Expand the printer memory with the
optional memory board. (ME1000 or
ME2000)
• Reduce the print resolution or reduce the
complexity of your document.
The number you called does not answer or is
busy. Or, you may have reached a number that
is not connected to a fax machine. Check the
number and try again.
The One-Touch key or Speed-Dial number you
pressed has no number assigned to it. You will
have to program a phone number. (See page
3-6~8)
• Press the FF/Cont switch to print the data
remaining in the printer memory.
• If you have installed the Windows® printer
driver, try again after setting the TrueType
mode to ‘Print as Graphics’ in the PRINT
menu of your application software.
• If this does not clear the error, reduce the
complexity of your document or reduce the
print resolution.
The recording paper is stuck in the printing
area.
Remove the jammed paper. (See page 14-8.)
A toner cartridge is not installed. Reinstall the
toner cartridge.
MEMORY FULL
NO RESPONSE/BUSY
N
NOT REGISTERED
P
PRINT OVERRUN
PRINTER JAM
S
SET CARTRIDGE
MACHINE ERROR XX
M
PRESS STOP KEY