Filter
Top Products
47Using TAM Mode (JX510P only)
ENGLISH
Follow the procedures below to delete all messages.
1 Press [Delete]. The LCD displays <YES=( ) NO=(#)>.
2 Press [ ] to delete all messages.
z A voice memo is not deleted (see page 46).
z If you decide not to delete all messages, press [#].
Remote Control Features
Use these features when you call home to play back any messages you may have received. You can
also use the remote control features to set TAM mode.
You must register a four-digit PIN as your password before you can use these features.
Registering the Password for Remote Control
1 Press [Menu].
2 Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The
LCD displays <USER SETTINGS>.
3 Use [{] or [}] to select <TAM SETTINGS>, then press [Start/Copy]. The LCD
displays <MESSAGE LENGTH>.
4 Use [{] or [}] to select <PASSWORD>, then press [Start/Copy]. The LCD
displays <PASSWORD XXXX>*.
*The default setting is 1234.
5 Use the numeric buttons to enter a four-digit PIN as your password, then press
[Start/Copy].
6 Press [Stop/Reset].
Registration ends and the fax returns to standby mode.