Filter
Top Products
18 Before Using Your Machine
ENGLISH
5 Enter the party’s number (up to 60 digits*) using the numeric buttons, then press
[Start/Copy] twice.
* The values may differ depending on the country/region of use.
6 Enter the party’s name (up to 16 letters) using the numeric buttons, then press
[Start/Copy] to register the name (see page 13).
7 To assign additional one-touch speed dialing numbers, repeat from step 4.
To finish, press [Stop/Reset].
Registering Coded Speed Dialing Numbers and
Names
Use coded speed dialing to dial a fax number at the press of three buttons. A fax/telephone number
can be registered under each two-digit speed dialing code and you can register up to 100 locations
(60 locations for the JX210P model). You can also register the name of the party the name appears
on the printout of the CODED SPEED DIAL TELEPHONE NO. LIST.
1 Press [Menu].
2 Use [{] or [}] to select <TEL REGISTRATION>, then press [Start/Copy]. The LCD
displays <1-TOUCH SPD DIAL>.
3 Use [{] or [}] to select <CODED SPEED DIAL>, then press [Start/Copy]. The
LCD displays < 00=>.
4 Use [{] or [}] to select the two-digit code (00-99)* under which you want to
register the number, then press [Start/Copy] twice.
If a number is already registered under this coded speed dialing code, the number is
displayed on the LCD.
*Select or enter the two-digit code (00-59) for the JX210P model.
Note
To delete the name and number registered under the one-touch speed dialing button, press [Clear]
and [Start/Copy] after you perform steps 1 to 4.
Note
It is recommended to print out a copy of the CODED SPEED DIAL TELEPHONE NO. LIST and keep it for
reference.
See “Activity Reports” on page 60 for details on printing the list.
TEL=250xxx_
CANON :A